---
title: "Entries show in one column after updating GravityView"
date: 2026-10-02
updated: 2026-10-26
author: "Casey Burridge"
link: "https://www.gravitykit.com/docs/gravityview/customizing-your-views/entries-show-in-one-column/"
category: "GravityView > Customizing Your Views"
---

If your View showed entries in a grid of two, three, or four columns and now shows every entry stacked in a single column, this article explains why and how to get your columns back. It applies to grid CSS written for the View's container, on sites that updated to [GravityView](https://www.gravitykit.com/products/gravityview/) 3.5.0 or later, the DIY Layout 2.6.0 or later, or GravityView Maps 3.11.0 or later.

You may have noticed it as one of these:

- A directory or card layout that "used to be 4 columns and is now stuck at one"
- Custom CSS columns that stopped working, even though the CSS is still in place
- Entries that no longer wrap to the next row
- Borders, backgrounds, or spacing that no longer reach the entries

![A GravityView List View with older grid CSS, showing member profiles with photos stacked one above the other in a single narrow column on the left, with empty space to the right where the other columns used to be.](https://www.gravitykit.com/wp-content/uploads/2026/10/gravityview-entries-one-column-before.jpg)

## Why your grid stopped working

GravityView 3.5.0 improved how screen readers announce a View. To do that, it added a new wrapper around the entries: a `<section>` element with the class `gv-entries`. A wrapper is an HTML element that contains other elements. The DIY Layout 2.6.0 and GravityView Maps 3.11.0 added the same wrapper to their layouts.

Most grid CSS turns the View's container into a grid. Before the wrapper, the container's children were the entries, so each entry took its own grid cell. With the wrapper, the container's child is the `gv-entries` section, and every entry is inside it.

Here is the change for a List View:

```
<!-- Before GravityView 3.5.0 -->
<div class="gv-list-multiple-container">
    <div class="gv-list-view">…</div>
    <div class="gv-list-view">…</div>
</div>

<!-- GravityView 3.5.0 and later -->
<div class="gv-list-multiple-container">
    <section class="gv-entries">
        <h2 class="gv-entries-title screen-reader-text">Results</h2>
        <div class="gv-list-view">…</div>
        <div class="gv-list-view">…</div>
    </section>
</div>
```

On GravityView 3.5.0 and 3.6.x, the grid put that one section in its first cell, and all of your entries stacked inside it. GravityView 3.7.0 fixed this for the Legacy theme. On the List, Layout Builder, and DIY layouts, the section no longer makes a box of its own, so a grid or flex rule on the container lays out the entries again.

Some CSS still needs a change on current versions:

- On the Vantage theme, the theme arranges the entries in the number of columns set in its **Columns** setting. Grid CSS in your theme's **Additional CSS** or a code snippets plugin doesn't change that. See [Option 2](#option-2-use-the-vantage-themes-columns-setting-no-code).
- CSS that finds entries by their place in the container stops matching. A child selector such as `.gv-list-multiple-container > .gv-list-view` matches nothing, and `:first-child` or `:nth-child()` counts the section's heading first. See [CSS that finds entries by position](#css-that-finds-entries-by-position).
- On GravityView 3.5.0 or 3.6.x with the Legacy theme, grid CSS on the container still shows one column. See [Option 1](#option-1-update-gravityview-legacy-theme).

## Option 1: Update GravityView (Legacy theme)

If the View uses the Legacy theme, update GravityView to the latest version. Grid CSS on the container works again on GravityView 3.7.0 and later.

- In your WordPress dashboard, go to **GravityKit**, then click **Manage Your Kit**.
- Find **GravityView** and click **Update** if an update is available.

Then [clear your page cache](#clear-your-page-cache) and check the View. If some entries still look wrong, read [CSS that finds entries by position](#css-that-finds-entries-by-position).

## Option 2: Use the Vantage theme's Columns setting (no code)

The Vantage theme has a **Columns** setting that builds the grid for you. This is the fix we recommend, because it does not depend on how the HTML is structured. **Columns** sets the columns of List, Layout Builder, and DIY Views.

### Step 1: Switch the View to Vantage and set the columns

- Go to **GravityKit**, then **All Views**, and open the View.
- Scroll to the **Settings** box below the **Layout** box, and click the **Styles** tab.
- Under **Theme**, click **Vantage**.
- Under **Columns**, click the number of columns you want, from **2** to **6**.
- Leave **Equal Height** checked if you want every card in a row to be the same height.
- Click **Update**.

![The Styles tab of the View settings, with the Vantage theme selected and the Columns setting outlined](https://www.gravitykit.com/wp-content/uploads/2026/10/gravityview-styles-tab-vantage-columns-2.png)
On GravityView 3.5.0, **Columns** shows one column. Version 3.6.0 fixed it

### Step 2: Remove your old grid CSS

Your old grid CSS can fight with the **Columns** setting, so remove it.

- In the same **Settings** box, click the **Custom Code** tab.
- In the **Custom CSS** box, delete the rules that set `display: grid`, `display: flex`, `grid-template-columns`, or entry widths on the View's container.
- Click **Update**.

If you added the grid CSS somewhere else, such as your theme's **Additional CSS** or a code snippets plugin, remove it there too.

**Note**: To keep a grid of your own on a Vantage View, put the CSS in the View's **Custom CSS** box. GravityView applies that CSS to the View ahead of the theme's rules, so the CSS in [Option 3](#option-3-update-your-custom-css) works there. The same CSS in your theme's **Additional CSS** loses to the theme.

![A GravityView List View using the Vantage theme with Columns set to 2, showing four product reviews as white cards with rounded corners, two cards per row.](https://www.gravitykit.com/wp-content/uploads/2026/10/gravityview-vantage-two-columns-after.jpg)

## Option 3: Update your custom CSS

If you want to keep your own design, put the grid on the `gv-entries` wrapper as well as on the container, and let the wrapper span the container's whole row. CSS written this way works on every version of GravityView, with or without the wrapper.

For example, change this:

```
.gv-list-multiple-container {
    display: grid;
    grid-template-columns: repeat(3, 1fr);
}
```

to this:

```
.gv-list-multiple-container,
.gv-list-multiple-container > .gv-entries {
    display: grid;
    grid-template-columns: repeat(3, 1fr);
}

.gv-list-multiple-container > .gv-entries {
    grid-column: 1 / -1;
}
```

Without the wrapper, the rules for it match nothing and the container stays the grid. With the wrapper, the wrapper takes up the container's whole row and holds the entries in the same columns.

The same change works for flexbox. If your CSS uses `display: flex` and `flex-wrap: wrap` on the container, add the `> .gv-entries` selector to that rule. In place of `grid-column: 1 / -1`, give the wrapper `flex-basis: 100%`. Without it, the wrapper can be narrower than the container, which makes your entries narrower too.

### CSS for the List layout

```
.gv-list-multiple-container,
.gv-list-multiple-container > .gv-entries {
    display: grid;
    grid-template-columns: repeat(3, 1fr); /* Change 3 to the number of columns you want */
    gap: 24px; /* Space between entries */
    align-items: start;
}

/* With the entries wrapper, the wrapper spans the whole row */
.gv-list-multiple-container > .gv-entries {
    grid-column: 1 / -1;
}

.gv-list-multiple-container .gv-list-view {
    min-width: 0;
    align-self: stretch; /* Remove this line if you don't want equal heights */
    display: flex;
    flex-direction: column;
}

.gv-list-multiple-container .gv-list-view-content {
    flex-grow: 1;
    display: flex;
}
```

### CSS for the Layout Builder layout

```
.gv-layout-builder-multiple-container,
.gv-layout-builder-multiple-container > .gv-entries {
    display: grid;
    grid-template-columns: repeat(3, 1fr); /* Change 3 to the number of columns you want */
    gap: 24px; /* Space between entries */
    align-items: start;
}

/* With the entries wrapper, the wrapper spans the whole row */
.gv-layout-builder-multiple-container > .gv-entries {
    grid-column: 1 / -1;
}

/* Remove the space GravityView adds between stacked entries */
.gv-layout-builder-multiple-container .gv-layout-builder-view--entry + .gv-layout-builder-view--entry {
    margin-top: 0;
}

.gv-layout-builder-multiple-container .gv-layout-builder-view {
    min-width: 0;
    align-self: stretch; /* Remove this line if you don't want equal heights */
}
```

### CSS for the DIY layout

```
.gv-diy-multiple-container,
.gv-diy-multiple-container > .gv-entries {
    display: grid;
    grid-template-columns: repeat(3, 1fr); /* Change 3 to the number of columns you want */
    gap: 24px; /* Space between entries */
    align-items: start;
}

/* With the entries wrapper, the wrapper spans the whole row */
.gv-diy-multiple-container > .gv-entries {
    grid-column: 1 / -1;
}

.gv-diy-view {
    min-width: 0;
    display: flex;
    flex-direction: column;
    align-self: stretch; /* Remove this line if you don't want equal heights */
}
```

For the Maps layout, use the CSS in [How to display GravityView entries in a grid](https://www.gravitykit.com/docs/gravityview/customizing-your-views/displaying-entries-as-a-grid-in-columns/). It selects the entries column by what it holds, so it works with and without the wrapper.

### Add the CSS to a View

- Go to **GravityKit**, then **All Views**, and open the View.
- In the **Settings** box, click the **Custom Code** tab.
- Replace your old grid rules in the **Custom CSS** box with the CSS above.
- Click **Update**.

## CSS that finds entries by position

The `gv-entries` section starts with a heading that only screen readers announce. The heading is positioned outside the page's normal flow, so it doesn't take a grid cell. Leave it in place, because removing it makes the View harder to use with a screen reader.

Rewrite selectors like these:

| Selector in your CSS | What happens | Write it as |

|---|---|---|
| `.gv-list-multiple-container > .gv-list-view` | Matches nothing: the entries are inside the section. | `.gv-list-multiple-container .gv-list-view` |
| `.gv-list-view:first-child` | Matches nothing: the heading is the first child. | `.gv-list-view:first-of-type` |
| `.gv-list-view:nth-child(2n)` | Counts the heading, so it picks the other entries. | `.gv-list-view:nth-of-type(2n)` |

The same applies to `.gv-layout-builder-view` and `.gv-diy-view` in the other layouts.

## Clear your page cache

After you fix the View, clear every cache on your site. A caching plugin, such as Hummingbird, WP Rocket, or LiteSpeed Cache, can keep serving a copy of the page saved before the fix. When that happens, the View looks right to you while you're logged in and still shows one column to visitors.

- Clear the cache in your caching plugin.
- If your host or a service such as Cloudflare has its own cache, clear that too.
- Open the page in a private browser window, where you're logged out, and check the columns.

## Still showing one column?

Check these in order:

| Check | What to look for |
|---|---|
| GravityView version | **GravityKit**, then **Manage Your Kit** shows 3.7.0 or later for grid CSS on a Legacy View, and 3.6.0 or later for the Vantage **Columns** setting. |
| Theme and layout | **Columns** appears only with the Vantage theme. It sets the columns of List, Layout Builder, and DIY Views. Table and DataTables Views don't have it. |
| Where the CSS is | On a Vantage View, grid CSS works only in the View's **Custom CSS** box. |
| Other CSS | Search your theme's **Additional CSS** and any code snippets plugin for the container classes, such as `.gv-list-multiple-container`. An old rule there can still override the grid. |
| Cache | Load the page in a private window after clearing every cache. |

If the View still shows one column, [contact our support team](https://www.gravitykit.com/support/) with the page address and the CSS you're using.

## Related articles

- [Themes: styling your Views with Legacy or Vantage](https://www.gravitykit.com/docs/gravityview/view-settings/modern-styles/)
- [GravityView CSS guide](https://www.gravitykit.com/docs/gravityview/customizing-your-views/css-guide/)

- [Adding custom CSS to your Views](https://www.gravitykit.com/docs/gravityview/customizing-your-views/adding-custom-css-to-your-website/)