---
title: "GravityBoard: How to trigger feeds after a card changes"
date: 2026-11-17
updated: 2026-11-17
author: "Rafael Bennemann"
link: "https://www.gravitykit.com/docs/gravityboard/trigger-feeds-card-changes/"
category: "GravityBoard"
---

Saving a card on a board updates its entry without running the form's add-on feeds, such as Zapier or Slack. To send the card's new values to those services, add one of the code snippets below. GravityBoard runs a separate action for each kind of change, so a snippet can run the feeds after any edit or only when a card moves into one lane.

Each time a snippet runs, the feeds run again. Depending on the add-on, running a feed again can create a duplicate record. Notifications don't need code: [How GravityBoard syncs to Gravity Forms](https://www.gravitykit.com/docs/gravityboard/how-gravityboard-syncs-to-gravity-forms/#what-a-card-change-sends-or-runs) shows which ones a card change sends.

## Run every feed after a card is edited

This snippet runs each active feed whose conditions match the entry, every time someone saves a card in the card editor with more than its lane changed. Changing the assignees there counts as an edit. The snippet also runs anything else hooked to `gform_entry_post_save`.

```
/**
 * Runs all of a form's add-on feeds again after a card is edited on a board.
 *
 * @param array    $entry   The card's entry, after the edit.
 * @param array    $feed    The board.
 * @param string[] $changes What the edit changed.
 */
add_action( 'gk/gravityboard/card/edited', function ( $entry, $feed, $changes ) {
    // Change 100 to your form's ID.
    if ( 100 !== (int) $entry['form_id'] ) {
        return;
    }

    // Load the form and entry again to get the values that were just saved.
    $form  = GFAPI::get_form( $entry['form_id'] );
    $entry = GFAPI::get_entry( $entry['id'] );

    // Gravity Forms runs a feed once per entry unless told otherwise.
    add_filter( 'gform_allow_feed_reprocessing', '__return_true', 1294873 );

    // Run the feeds right away, during this request.
    add_filter( 'gform_is_feed_asynchronous', '__return_false', 1294873 );

    gf_apply_filters( array( 'gform_entry_post_save', $form['id'] ), $entry, $form );

    remove_filter( 'gform_allow_feed_reprocessing', '__return_true', 1294873 );
    remove_filter( 'gform_is_feed_asynchronous', '__return_false', 1294873 );
}, 10, 3 );
```

**Note**: To add this code to your site, follow [Adding custom PHP code snippets to your website](https://www.gravitykit.com/docs/gravityview/customizing-your-views/where-to-put-code-samples/).

This snippet doesn't run when a card moves to another lane, whether someone drags it or saves the card editor with only the lane changed. To run the feeds on a move, use the next snippet.

## Run every feed when a card moves into one lane

This snippet runs the feeds when a card moves into the lane you name, whether someone drags the card or changes its lane in the card editor. Moves into other lanes are skipped.

Change `3` to the ID of the field your lanes come from, and `Approved` to the lane's name. If the field uses separate choice values, use the lane's value.

```
/**
 * Runs all of a form's add-on feeds when a card moves into one lane.
 *
 * @param array           $entry          The card's entry, after the move.
 * @param array           $feed           The board.
 * @param string|int|null $source_lane_id The lane the card left.
 * @param int             $target_lane_id The lane the card moved into.
 */
add_action( 'gk/gravityboard/card/changed-lane', function ( $entry, $feed, $source_lane_id, $target_lane_id ) {
    // Change 100 to your form's ID.
    if ( 100 !== (int) $entry['form_id'] ) {
        return;
    }

    // Change 3 to the ID of the field your lanes come from, and Approved to the lane's value.
    if ( 'Approved' !== rgar( $entry, '3' ) ) {
        return;
    }

    // Load the form and entry again to get the values that were just saved.
    $form  = GFAPI::get_form( $entry['form_id'] );
    $entry = GFAPI::get_entry( $entry['id'] );

    // Gravity Forms runs a feed once per entry unless told otherwise.
    add_filter( 'gform_allow_feed_reprocessing', '__return_true', 1294873 );

    // Run the feeds right away, during this request.
    add_filter( 'gform_is_feed_asynchronous', '__return_false', 1294873 );

    gf_apply_filters( array( 'gform_entry_post_save', $form['id'] ), $entry, $form );

    remove_filter( 'gform_allow_feed_reprocessing', '__return_true', 1294873 );
    remove_filter( 'gform_is_feed_asynchronous', '__return_false', 1294873 );
}, 10, 4 );
```

**Note**: To add this code to your site, follow [Adding custom PHP code snippets to your website](https://www.gravitykit.com/docs/gravityview/customizing-your-views/where-to-put-code-samples/).

## Run the feeds of one add-on when a card moves into one lane

This snippet runs the feeds of one add-on and leaves the others alone. It's written for Zapier. For another add-on, replace `GF_Zapier` in both places with the add-on's class name, which [Run one add-on's feeds](https://www.gravitykit.com/docs/gravityview/advanced/trigger-feeds-edit-entry/#run-one-addons-feeds) lists for common add-ons.

```
/**
 * Runs one add-on's feeds when a card moves into one lane.
 *
 * @param array           $entry          The card's entry, after the move.
 * @param array           $feed           The board.
 * @param string|int|null $source_lane_id The lane the card left.
 * @param int             $target_lane_id The lane the card moved into.
 */
add_action( 'gk/gravityboard/card/changed-lane', function ( $entry, $feed, $source_lane_id, $target_lane_id ) {
    // Change 100 to your form's ID.
    if ( 100 !== (int) $entry['form_id'] ) {
        return;
    }

    // Change 3 to the ID of the field your lanes come from, and Approved to the lane's value.
    if ( 'Approved' !== rgar( $entry, '3' ) ) {
        return;
    }

    // Change GF_Zapier in the next line and in the get_instance() line below.
    if ( ! class_exists( 'GF_Zapier' ) ) {
        return;
    }

    // Load the form and entry again to get the values that were just saved.
    $form  = GFAPI::get_form( $entry['form_id'] );
    $entry = GFAPI::get_entry( $entry['id'] );

    // Gravity Forms runs a feed once per entry unless told otherwise.
    add_filter( 'gform_allow_feed_reprocessing', '__return_true', 1294873 );

    // Run the feeds right away, during this request.
    add_filter( 'gform_is_feed_asynchronous', '__return_false', 1294873 );

    GF_Zapier::get_instance()->maybe_process_feed( $entry, $form );

    remove_filter( 'gform_allow_feed_reprocessing', '__return_true', 1294873 );
    remove_filter( 'gform_is_feed_asynchronous', '__return_false', 1294873 );
}, 10, 4 );
```

**Note**: To add this code to your site, follow [Adding custom PHP code snippets to your website](https://www.gravitykit.com/docs/gravityview/customizing-your-views/where-to-put-code-samples/).

`remove_filter()` removes a callback only at the priority it's given. The snippets use `1294873`, a priority other code is unlikely to use, so removing their filters afterward leaves other code's filters on the same hooks in place.

## Other changes you can run feeds on

GravityBoard runs an action for each of these changes as well. To run the feeds on one of them, change the first snippet in three places:

- Replace `gk/gravityboard/card/edited` with the action's name.
- Replace `$entry, $feed, $changes` with the action's arguments from the table, in the same order.
- Change the last number, the `3` in `}, 10, 3 );`, to the number of arguments, which is `4` for some actions.

| Action | Runs when | Arguments |
|---|---|---|
| [`gk/gravityboard/card/added`](https://www.gravitykit.dev/docs/gravityboard/actions/gk-gravityboard-card-added/) | A card is added on the board | `$entry, $feed, $request` |
| [`gk/gravityboard/card/sorted`](https://www.gravitykit.dev/docs/gravityboard/actions/gk-gravityboard-card-sorted/) | A card moves up or down in its lane | `$entry, $feed, $source_lane_id, $ordered_ids` |
| [`gk/gravityboard/assignees/updated`](https://www.gravitykit.dev/docs/gravityboard/actions/gk-gravityboard-assignees-updated/) | A card's assignees change | `$entry_id, $assignees, $feed, $form` |
| [`gk/gravityboard/attachments/updated`](https://www.gravitykit.dev/docs/gravityboard/actions/gk-gravityboard-attachments-updated/) | A file is added to a card or removed from it | `$attachments, $entry, $feed` |
| [`gk/gravityboard/checklists/updated`](https://www.gravitykit.dev/docs/gravityboard/actions/gk-gravityboard-checklists-updated/) | A card's checklists are saved | `$checklists, $entry, $feed` |

`gk/gravityboard/assignees/updated` passes the entry's ID instead of the entry. Add `$entry = GFAPI::get_entry( $entry_id );` as the function's first line, before the form check.

Adding a file to a card doesn't run `gk/gravityboard/card/edited`. The full list of actions is in [GravityBoard hooks and REST API](https://www.gravitykit.com/docs/gravityboard/developer-hooks/).